How can I re-pair the remote control with the TV receiver?

The re-pairing of the remote control goes as follows.

)

Step 1

Press the red and blue button on the remote control simultaneously and hold them until the red LED lights up. now you can release the red/blue button.

Step 2

Then press the OK button and the green LED will light up twice. The remote control is now erased and also in pairing mode, the old pairing information is no longer present. You will not see any change on the TV but you can no longer control the box with your remote control.

Step 3

Now put your TV receiver in pairing mode by pressing the power button on the bottom of the box twice briefly. The pairing screen will appear on the TV (you may still hear the program that was on in the background) this is not a problem.

Step 4

You can now re-pair the remote control with the TV receiver (so not the pairing with the TV, that is above) follow the procedure shown on the screen. With a working connection (internet cable or wifi) the TV receiver will immediately proceed to check the software version. If the network connection is not in order, the receiver will show the wifi setup screen and you can select and connect a wifi network, after which the software is still checked and the TV receiver will go to normal playout.

Updated on: 07/12/2023